VS Sewing Machine, Sewing Machine showroom in Chennai offers you with the Top selling brands along with all its Sewing Machines models in the Industry. You can get the recommendations over here with the industry experts. Also we serves you best Pre-Selling as well as the Post Selling Services.
Machine is working, foot pedal is working, but you just do not get stitches on your fabric. Do the necessary cleaning, bobbin area checking etc. See that the thread is correctly set in the bobbin with the thread passing through the necessary slots.
If the bobbin area is working, the hook area is turning properly, bobbin case is alright, and still if the problem persists, this usually indicates that there is a problem with the timing of your machine or that something is broken inside somewhere or that something is stuck inside. Electronic Sewing Machine Repair Center in Chennai
The timing of a sewing machine has to be fixed by a sewing machine mechanic.
Maybe something is broken inside or something is stuck under the needle plate. If you have cleaned the whole machine and still this is persisting you may have to take the machine to repair shop. The broken things inside needs to be taken care of.
Also, ensure that you avoid turning the hand wheel backwards to avoid any future problems with the machine. It should only be turned to the front (towards you)
Usually the sound comes from the bobbin area. Check the area thoroughly. The needle maybe hitting the bobbin case or hook. The timing may be off in a worst-case scenario. Rusty parts inside or stuck up parts or things like pins stuck inside, broken belt all can create weird sounds. Computerized Zig Zag Sewing Machine Repair Center in Chennai
If the needle is hitting the hook area there may be a knocking sound there – Re-read the above section on small repairs on the bobbin area for solving this problem.
If there are huge loops on the back of the fabric, the problem is that the top thread is not in the tension disks. Be sure to thread the machine with PURPOSE. No wimpy threading! Firmly seat the thread in each groove and guide of the machine. If the machine is not threaded correctly it will not sew.
Comments